by P. Marian in Datasheets |
The UTC UM66TXXL series are CMOS LSI designed for using in door bell, telephone and toy application. It is an on-chip ROM programmed for musical performance. Produced by CMOS technology, the device results in very low power consumption. Since the UTC UM66TXXL series include oscillation circuits a compact melody module can be...
Light Alarm Circuit with LDR
by P. Marian in Alarms |
This musical light alarm circuit is very simple, uses only 7 components, a LDR and a 3.6 V battery or 3 x 1.2 volts rechargeable batteries. The well-known UM66 is used as the sound generator and will give a pleasent wake up alarm. As you probably know the LDR is a light dependent resistor. Normally the resistance of an LDR is...
Overflow Indicator Circuit
by D Mohankumar in Measure |
This Simple circuit can monitor overflow of water from the Overhead tank. The sensor placed close to the lid of the overhead tank always monitor the presence of water coming through the lid and gives a music tone when it senses the over flow. ROM IC UM66 is used to generate melody tone. The circuit is easy to construct. Sensor...
Automatic Night Lamp with Morning Alarm
by P. Marian in 555 | DIY | Lights |
This circuit project automatically turns on a night lamp when bedroom light is switched off. The lamp remains ON until the light sensor senses daylight in the morning. A super-bright white LED is used as the night lamp. It gives bright and cool light in the room. When the sensor detects the daylight in the morning, a melodious...
IR Infrared Detector Circuit
by P. Marian in DIY | Measure |
This infrared detector can be used to detect the presence of modulated infrared signals in its vicinity from any electronic source, for instance, an IR handheld remote controller. It can also be used for testing infrared burglar alarm systems. This is not an infrared motion detector! The IR detector circuit in principle,...
Night Lamp with Alarm
by P. Marian in 555 | Alarms | DIY |
This circuit automatically turns on a night lamp when bedroom light is switched off. The lamp remains ‘on’ until the light sensor senses daylight in the morning. A super-bright white LED is used as the night lamp. It gives bright and cool light in the room. When the sensor detects the daylight in the morning, a melodious...