• Register
  • Login
  • looking for something?

    7 x Audio Preamplifiers Projects and Circuit

    Browse through a total of 7 audio preamplifiers.

    Hi-Fi Stereo Preamp Circuit This Hi Fi stereo preamplifier circuit is built with TDA1054 IC from SGS. TDA1054 is a 16-pin DIL package and integrates 2 separate preamp circuits. It is a low noise preamp with little or no problem in the building process. The first half of the circuit (IC1a) it has an input sensitivity of 3 mV and has a frequency correction...
    FET Preamplifier Circuit Field Effect Transistor is an amplifying device in which the output current depends on the input voltage. The FET Pre Amplifier described here is a sensitive and stable Preamp circuit using an N-Channel FET and a PNP Bipolar transistor. This combination gives high input impedance and low output impedance with stabilized gain....
    Low Noise Microphone Preamplifier Circuit The microphone preamplifier circuit design presented in this schematic use SSM2015 produced by Precision Monolithics Inc. (PMI) which offers a high amplification and low noise ( 1.3nV/√f). Has been designed to work with differential input signals and can deliver 10 to 2000x amplification and it is term of R4 value. For R5 = R6...
    Dynamic Mic Preamplifier Circuit This mic preamp uses the low noise IC uA739. The circuit is an example of how a good preamplifier can be designed for dynamic microphones. The IC houses two identical integrated preamp circuits. The second preamp is used in identical manner for the second channel of the stereo microphone. Diagram bellow shows the pin numbers...
    Low Noise Audio Preamplifier Circuit A preamplifier circuit with a very low noise characteristic can be built by simply combining a FET transistor with a bipolar one. The input impedance of the preamp circuit is almost the same as the gate impedance of the FET transistor (around 1MΩ) The output impedance at the other end is about 1KΩ. The frequency of...
    Audio Preamplifier Scanner Circuit This circuit scan all the preamplifier entries to identify where is a audio signal and that entry remains selected. After a sign of signal absence, scanning resumes. Scanning action is supported by rectangular signal generator IC2c. Scanner’s entries are connected to the audio entries from volume control board of the...
    Class A Preamplifier Circuit This class A preamplifier has been designed in a symmetrical structure. In the input differential stages we’ve used the dual transistors T1 and T2. Polarisation correction is essential because of the amplification differences and is assured with T12. P2 brings the output voltage to 0. For maximum performances, T7 and T9...
    looking for something?