X
Advertisement

1,041 questions

1,221 answers

205 comments

779 users

ASK modulation,

271 views
0 votes
ASK modulation,

hi, I'm new in the group.

I got this RC/arduino plane project and I got a little bit confused on the transmitter and receiver, so sorry for the trouble guys hope you help me out.

these are my questions;

1. What type of modulation techniques could I use to transmit and receive datas that my arduino collected from the transmitter side and transferred  on the receiver side? ( even I have a question below still hoping you could tell me some)

2. I read this article http://www.electroschematics.com/9999/rc-link-ask-environment/ and I found out that ASK modulation can be used, but the range of these modules is just 150 m. I was aiming on 5 km. so if you have any Idea on how to modify it or should I make a big modification, please help me,

3. And lastly if  you have any tutorial links or if you know if how does the circuits from the above URL, please help me out.
asked Sep 28 by mozartdavegmail-com (120 points)

1 Answer

0 votes

I do not know what country you are from but each country as limits on the amount of power a transmitter can radiate in a given band.  They also specify which band can be used for what type of service. 
 
The obvious is the more power the greater the distance; however  To prevent interference with other units on the same frequency the range is limited by the amount of power allowed in a particular band for a non licensed operator.  This is generally in the milliwatts.  
 
Different types of modulation can help increase the range.  There is also using SSB Single Side Band, amateur radio operates are familiar with this.
 
To the best of my knowledge the 5K range you want will not be reliable with the allowed power unless you have a very good receiver in a low noise area. 
 
My recommendation would be get a amateur license if you want to build it or get a piece of commercial gear designed do the job.  That equipment would also be licensed.
answered Sep 30 by gilshultzhome-com (17,730 points)

Related questions

  • 0 votes
answered Jan 15, 2013 by admin (6,160 points)
  • 0 votes
answered Jan 2, 2013 by ashutoshr2 (240 points)

1,041 questions

1,221 answers

205 comments

779 users

Latest Article Comments

Stereo Audio Switch...
"I want to use this stereo audio switch circuit as the basis for a 6 step (o-10V) motor control with"
Earth Fault Indicator...
"Hello, I have tested the circuit and it have a problem. The green LED goes on with a bad earth"
Electronic Dog Repellent...
"Esse repelente de cães funciona ,mesmo? Ele faz o cão para de latir e qual a distância que o"
Simple and Useful LED...
"Does changing the voltage change the value of"
12V Battery Level Indicator...
"is this cct can used to get the battery level when it charging ? (if battery charging source"
IT = CV …or what I never learned in tech...
">> what happens when time becomes infinite??? tl;dr; It won't! Really NOT! Trust me, I'd"
Audio Compression Amplifier...
"Hi Keith, An Excellent AGC/ Compression circuit, you have done. Is there a way to calibrate"
Home IoT - Voice Controlled Lab Lights with Amazon Alexa and...
"I could could see this being used in a home theater. Or even better, I could see this being used"
Battery Backup...
"any way you can help with a schematic"
Hacking a Camera Shutter with Infineon TLE94112LE and Arduino - Part...
"Hey Adam! Me too. I always draw by hand many of my first schematic design. It is easier and faster"
electroschematics group on facebook
...
  Search 4 million + Products
Browse Products