• Register
  • Login
  • The MAX9910 datasheet specifies that this amplifier is unity-gain stable for loads up to 30pF. However, the capacitive load can be increased to 250pF when the amplifier is configured for a minimum gain of 10V/V. Applications that require greater capacitive-drive capability should use an isolation resistor between the output and the capacitive load. Also, in unity-gain applications with relatively small RL (approximately 5kΩ), the capacitive load can be increased up to 200pF.

    max9910-op-amp

    
    subscribe to newsletter

    What do you think about this article? Leave a comment!

    You may add a picture too