• Register
  • Login
  • Search 4 million + Products
    this message might be for you!

    NBFM or Narrow Band Frequncy Modulation is used in this 27 MHz transmitter circuit schematic. This circuit is an application by Motorola MC2833 – VHF transmitter with FM modulation and narrow band in a single chip.
    The output power is 10mW (+10 dBm) and the coverage is 10 – 20m.
    P1 is used to adjust microphone amplification and P2 to adjust the deviation. Remember that this 27MHz fm transmitter use NBFM with maximum 5KHz deviation, this mean you have to use an nbfm receiver to obtain enough audio level.

    The transmitter is easy to adjust: trim C9, C9 and C18 for maximum output power on a artificial 50Ω load. Then listen on a 27MHz radio receiver and adjust P1 and P2 untill you obtain the best modulation.
    X1 = 27.005 MHz quartz

    CB 27MHz transmitter circuit schematic

    CB 27MHz Transmitter Circuit schematic


    attentionThis article was received from one of our visitors, please take into consideration that the presented information might not be correct. Also please contact us if you have any problems with the presented material.
    ask a question

    2 Responses to "CB 27MHz Transmitter Circuit"

    1. Hello dear Member,

      the Name from the used circuit is wrong. MC2833 is an dioden array. The right name from the circuit is MC2831. Please look at alldatasheet or else. Sorry for my bad english.



    2. Hello ,

      I found this article and think it´s from Elektor. But the name from the cicuit is wrong.


    You need to log in if you need to post comments on ElectroSchematics.com or register if you do not have an account.